24 fc-10 series 1.0mm pitch ( smt & dip type ) features 1. utilization of an lif structure allows for simple and easy insertion. 2. choice of versions available, such as smt and dip types, and lower or upper contact type. specification 1. rating : 0.5a, 50v ac/dc max. 2. contact resistance : 30m ? , max., initially 3. insulation resistance : 1000m ? , min. at 500v dc 4. withstanding voltage : 500v ac (for one minute) 5. operating temperature range : ?5?c to +70?c materials and plating housing : thermoplastic resin, natural color, 94v-0 contact : cu alloy, au plating note please contact our local sales agent for supply on embossed tape. smt type cff23 -0150f no. of pins no. of pins a no. of pins a 05 5 4.0 18 18 17.0 06 6 5.0 19 19 18.0 07 7 6.0 20 20 19.0 08 8 7.0 21 21 20.0 09 9 8.0 22 22 21.0 10 10 9.0 23 23 22.0 11 11 10.0 24 24 23.0 12 12 11.0 25 25 24.0 13 13 12.0 26 26 25.0 14 14 13.0 27 27 26.0 15 15 14.0 28 28 27.0 16 16 15.0 29 29 28.0 17 17 16.0 30 30 29.0 dip type cff51 -0150f no. of pins a 2.1 a 6.6 a a 6.0 0.35 1.0 1.5 0.6 3.2 0.4 0.25 6.1 1.3 5.5 3.9(inserted size) a 6.6 a 2.1 a 1.0 0.4 3.2 2.0 5.5 3.3 3.9(inserted size) ffc connectors
25 p.c. board dimension part no. contact position structure p.c. board dimension cff23 -0150f smt?ight angle upper cff43 -0150f smt ?everse right angle lower cff41 -0150f smt?traight pin no.1 pin no.1 cff51 -0150f dip?traight pin no.1 cff33 -0150f dip?ight angle upper pin no.1 cff83 -0150f dip ?everse right angle lower pin no.1 cff24 -0150f smt?ight angle upper list of the fc-10 series a a 2.8 2.0 1.0 0.5 2.0 2.35 2.0 1.0 a 2.0 0.8 applicable fpc/ffc dimension ( t = 0.3 0.05 ) 2-r0.3 4.0 1.0 0.05 1.0 0.15 (a 2) 0.1 a 0.05 0.6 + 0.1 0 ffc connectors fc-10 series fpc plating to recommend : au plating ? for cff24 -0150f, please refer to the adove table. ? for cff24 -0150f, please contact us. smt type dip type
|